OTTOFLEX Objektdichtband Teaserbild

OTTOFLEX® Project sealing tape

The sealing tape

Special elastomer tape fully fabric reinforced on both sides
For indoor and outdoor application
  • Very flexible and tear resistant
  • Good workability
  • Resistant to aging
Technical datasheet
EMICODE® EC1 PLUS

Product details

Fields of application

  • Composite sealing for moisture-prone rooms and wet rooms underneath ceramic coverings and natural stone
  • Sealing at the edges or component joint areas
  • Sealing of wall corners to bridge cracks and joints

Characteristics

  • Very flexible, resistant to aging and tear
  • Compatible with commercially available tile adhesives and solvent-free coatings
  • Secure connection with OTTOFLEX® protective coating / slurry seal coating / sealing strip/ sealing and decoupling strip
  • Compatible with OTTO sealants and adhesives

Standards and tests

  • Complies with the water action categories W0-I, W1-I, W2-I and W3-I for tear class R1-I in accordance with DIN 18534
  • Complies with the water action category W1-B for the tear classes R0-B and R1-B for the container sites S1-B and S2-B in accordance with DIN 18535
  • According to the moisture resistance classes A0 and B0 according to ZDB as well as A, B and C according to abP
  • Complies with the stress categories W1, W2, W3, W4, W5 and W6 in accordance with ÖNORM B 3407
  • Tested according to DIN EN 1928 (version B) test of the waterimpermeability
  • French VOC-emission class A+
  • EMICODE® EC 1 Plus - very low emission

Data sheets & tests

Technical datasheetDownload
DownloadProduct information

Colours & form of delivery

DesignationSealing widthOrder unit (OU)Packaging unit (PU)Pieces per palletOrder code
12-series tape12 cm1 roll, each 50m6 rolls, each 50 m90OFOD-12/50

Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.