OTTOSEAL® A 220 Turbo

OTTOSEAL® A 220 Turbo

The instantly paintable acrylic sealant

1-component acrylic sealant
For indoor and outdoor application
  • Can be painted over instantly
  • Time-saving
  • Frost-resistant
  • Minimised crack formation
Technical datasheet
EMICODE® EC1 PLUS

Product details

The special turbo acrylic sealant OTTOSEAL® A 220 is perfect for time-saving work and can be painted over immediately with standard emulsion paints. Its high degree of whiteness makes it the perfect choice for all connection joints in interior construction on walls and ceilings, e.g. between walls and door frames or over baseboards.

Fields of application

  • Sealing of connection joints in the base, wall and ceiling area
  • Can be used for decorative renovation work such as stucco work, filling cracks in walls, etc.

Characteristics

  • Can be painted over/varnished very quickly – please observe application instructions in the technical data sheet
  • Time-saving – thanks to a formula optimally adapted for being painted over
  • Frost-resistant - Can be stored and transported in temperatures as low as -10 °C for up to 48 hours
  • Minimal crack formation - tested using standard colour systems
  • No yellowing

Standards and tests

  • Tested according to EN 15651 – Part 1: F EXT-INT 7.5 P
  • Tested fire behaviour in accordance with EN 13501: class E
  • EMICODE® EC 1 Plus - very low emission
  • French VOC-emission class A+
  • Suitable for applications according to IVD instruction sheet no. 12+20+29+31+32+35 (IVD = German industry association sealants)

Colours & form of delivery

310 ml cartridge
white
A220-04-C01
Pieces per packaging unit 20
Pieces per pallet 1200

No special colours possible.

Due to typographical reasons the colours shown below may differ from the original colours of the products.

Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.

Consumption calculator

Please note: This values are approximate and serve as a rough guide for rightangled joints. The depth of the joints is measured to the rear of the profile. Depending on the processing method, additional expenditure of up to 25% is possible.


More information