OTTOFLEX Abdichtbahn Hauptbild

OTTOFLEX® Sealing strip

The time-saving composite sealing

Polyethylene sealing strip with double non-woven fabric
For indoor and outdoor application
  • Fast further processing
  • High stretching and crack bridging properties
  • Waterproof and water vapour retardant
  • Durably resistant to aging
Technical datasheet
EMICODE® EC1 PLUS

Product details

Fields of application

  • Composite sealing in moisture-prone rooms and wet rooms underneath ceramic coverings and natural stone using the thin bed method (e.g. wet areas such as bathrooms, shower rooms, edge areas of swimming pools, saunas, steam baths, steam saunas, as well as for industrial uses in the foodstuffs industry, e.g. in breweries, dairies)
  • Flexible composite sealing under ceramic coverings and natural stone on balconies, terraces and arcades (not above used rooms) with a gradient ≥ 1.5 %
  • OTTOFLEX® Sealing strip is a crack-bridging, uncoupling, watertight, alternative sealing strip with non-woven fabric for safe fastening of the tile adhesive applied

Characteristics

  • Impermeable to water and has water vapour retarding properties
  • High practical stretching and crack bridging properties
  • Resistant to ageing and decomposition
  • Good resistance to aqueous solutions of salt, acids and alkaline solutions
  • The product is alkali-resistant according to the test specifications of AbP Sealing in connection with tiles and slabs and of ETAG 022
  • Complies with building material class B2 “normally inflammable” in accordance with DIN 4102-1

Standards and tests

  • Complies with the water action categories W0-I, W1-I, W2-I and W3-I for tear class R1-I in accordance with DIN 18534
  • According to the moisture resistance classes A and C according to abP as well as A0 and B0 according to ZDB information sheet
  • General building inspection certificate - Panel-shaped seal in combination with tiles and board coverings for use as building sealant
  • Based on the inspections for awarding an AbP in accordance with PG-AIV-F and the resulting areas of application, the following stress categories can be assigned from the ÖNORM B 3407 – W1, W2, W3, W4, W5 and W6
  • French VOC-emission class A+
  • EMICODE® EC 1 Plus - very low emission

Data sheets & tests

Technical datasheetDownload
DownloadAdhesives tested in the OTTOFLEX® System

Colours & form of delivery

Dimension (length x width)Order unit (OU)Pieces per palletOrder code
30 m x 1 m1 piece26OFAB-100

Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.