OTTOSEAL S 112 - Teaserbild


The silicone sealant for window bars

1-component silicone sealant compound based on alkoxy, neutral cross-linking
For indoor application
  • Low odour
  • Repair-friendly
  • Laminated safety glass
Technical datasheet

Product details

Fields of application

  • For sealing and back filling of frames and window bars on windows and doors - improves the leak tightness. The filling material has less adhesion in comparison to standard glazing sealants, so its easier to remove the window bars for repair works.
  • Avoids accumulation of condensation through incoming warm air and thus protects against humidity affecting the edge sealing, which could lead to damages to the wooden window frame.
  • For sealing on the window frame below the glass edge (position 4). Please avoid full surface contact with the isolation glass edge sealing in the rebate bond. Maximum 3 mm overlap is permissible.
  • For compatibility to IG-edge sealing materials please see our recent compatibility list. The up-to-date list can be downloaded from our website


  • Compatible with PVB sheets according to ift guideline DI-02/1
  • Suitable for processing VSG
  • Non-corrosive
  • No (oxidation) corrosion on unprotected metal surfaces
  • Low odour
  • Convenient processing
  • Low adhesion
  • Easy removability e.g. of the glass retaining strip
  • Good compatibility with paints according to DIN 52452 (not paintable)
  • No interaction with existing and adjacent coatings

Standards and tests

  • French VOC-emission class A+
  • Classification according to building certification systems, see the sustainability data sheet

Colours & form of delivery

310 ml cartridge 580 ml aluminium foil bag
S112-04-C00 S112-08-C00
Units per packaging unit 20 20
Pieces per pallet 1200 600

Due to typographical reasons the colours shown below may differ from the original colours of the products.

Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.

Consumption calculator

Please note: This values are approximate and serve as a rough guide for rightangled joints. The depth of the joints is measured to the rear of the profile. Depending on the processing method, additional expenditure of up to 25% is possible.

Do you have questions about our OTTOSEAL® sealants?

Our application consultation is available Monday to Thursday from 8:00 a.m. to 4:00 p.m. and Friday from 8:00 a.m. to 2:00 p.m. and will be happy to receive your request.